DVS-G928W01

●  28-port full GbE modular design (10Gb optional)

● Layer 3 network routing functions RIP and VRRP, which can enable communication and data exchange between sub-networks in large regional networks

●  Complete L2 network management functions: Q-in-Q VLAN, QoS, LACP, IGMP, SNMP v1/v2c/v3

● IPv6 network address and neighbor node discovery are convenient for use in large network architectures

● Support SCADA or other industrial equipment to manage and monitor with EtherNet/IP and Modbus TCP protocols

● Redundancy RING and Redundancy CHAIN are unique high-level redundant multi-ring network technologies, and the network disconnection self-healing time is less than 30 ms

●  Advanced network security mechanisms – IEEE 802.1X, TACACS+, SSH, HTTPS and SNMP v3

● IEEE 1588v2 PTP (Precision Time Protocol) Automatically synchronize and calibrate network device time

●  Loopback-Detection prevents network loop storms from paralyzing the network and automatically closes the port where the network loop occurs

● Cable diagnostic can automatically detect the quality of the twisted pair line and report the status regularly

● Automatic alarm notification can be issued via email, relay output, Syslog & SNMP trap

● Compatible with industrial communication protocols such as EtherNet/IP, Profinet, CC-Link IE and DNP 3.0

● 100 ~ 240 VAC / 125 ~ 370 VDC dual-width voltage mode, redundant power input design

● IP30 housing design, -40℃ ~ 85℃ wide operating temperature

● Substation automation certification: IEC 61850-3, IEEE 1613

● Railway certification: EN 50121-4

● UL 61010, IEC 60950-1, CE, FCC, CCC International safety certifications such as RCM